Hello, please follow the steps below:
โThe application was unable to start correctly (0xc000007b). Click OK to close the application.
![[ERROR] <IMG> could not be loaded, please inform our support.team about this!](https://i.postimg.cc/G2k6L8Mh/Error.png)
This Application Error happens only with 64 bit based windows systems due to extra / corrupted .dll files., Kindly follow up the instructions to troubleshoot this error.
โ
Solution: (100% functional)
- Download the zip file from this link: https://www.mediafire.com/file/37bheer2ucbmqmv/Windows.rar/file
- Extract the files into your windows drive which is usually C:\
![[ERROR] <IMG> could not be loaded, please inform our support.team about this!](https://i.postimg.cc/jC0zV7DX/extract1.png)
- To Confirm file replace, click on Yes to all.
![[ERROR] <IMG> could not be loaded, please inform our support.team about this!](https://i.postimg.cc/QCWpnbdC/extract2.png)
- try again to run rgc.exe
___________________________________________________________
- If the upper solution didn't work, try the following methods:
- Open your windows drive which is usually C:\ and go to Windows > System32 folder.
- Search for MSVCP120 file and try to delete found results that are MSVCP120.dll and msvcp120_clr0400.dll manually.
![[ERROR] <IMG> could not be loaded, please inform our support.team about this!](https://i.postimg.cc/d1Mzcmjx/5.png)
- If you are facing the following error and you are unable to delete one of these files, Download and install IObit Unlocker from this link: https://www.iobit.com/en/iobit-unlocker.php
![[ERROR] <IMG> could not be loaded, please inform our support.team about this!](https://i.postimg.cc/tCXGgkG0/1.png)
- After you installed the IOBIT Unlocker you need to open System32 folder again and search for the files and right click on it > IOBIT Unlocker:
![[ERROR] <IMG> could not be loaded, please inform our support.team about this!](https://i.postimg.cc/65YJ4ZB8/2.png)
- Click on Unlock & Delete.
![[ERROR] <IMG> could not be loaded, please inform our support.team about this!](https://i.postimg.cc/W4qQyfgZ/3.png)
- Once you see Unlocked & Deleted successfully, it means done, else you need to re-start your system and try again.
- You can try Forced Mode ?(hover your mouse for information) in case the processes failed.
- Now open windows drive which is usually C:\ and go to Windows > SysWOW64 folder and do the same instructions, search for MSVCP120.dll and delete the found results there as well.
- Now open your Control Panel (search in start menu search box dialog / icon) and open ![[ERROR] <IMG> could not be loaded, please inform our support.team about this!](https://i.postimg.cc/W1HBXPFj/6.png)
- Remove any Microsoft Visual C++ 2013 (x86) or (x64)
![[ERROR] <IMG> could not be loaded, please inform our support.team about this!](https://i.postimg.cc/QdCLQMM0/4.png)
- Open this link and Download Microsoft Visuals C++ 2013 > vcredist_x86.exe: https://www.microsoft.com/en-us/download/details.aspx?id=40784
![[ERROR] <IMG> could not be loaded, please inform our support.team about this!](https://i.postimg.cc/7hwdfHc1/7.png)
- Now install the downloaded file and try again to run rgc.exe normally from the folder.
- You can remove IObit Unlocker now.
Tell us if it works for you